Zo, dat was wel even werk, maar misschien heb ik iets bruikbaars gevonden.
Via de site van Metz, kun je alleen de handleiding vinden van de
45 cl-1.Maar door dan verder te googlen kwam ik op het
volgende forum terecht, waarin dit stond:
Citaat:
Bob Hack , Feb 24, 2007; 12:37 p.m.
Someone sent me a copy of the CT-1 manual. Thanks! There is no mention in either manual of the trigger voltage and I am not certain how to measure it. Do I use a high impedence digital meter or a low imperence analog meter? Is it necessary to shunt the output with specific value resistor when measuring to get an accurate reading? The manuals show the same recycle times. There are different pinouts for both the sync cord and the power cord, requiring different cables and maybe some power accessories?
Nou zou je kunnen proberen hem te mailen, maar het is al een bericht uit 2007...
Ik hoop dat dit heeft geholpen
ps, ik kwam onderweg triggervoltages tegen van 270 tot 600v, dus laat de flitser uit de buurt van je camera
Edit:Hebbes
Specifications:
Type: Handle mount
Flash Duration: 1/300-1/20000
Color Temperature: 5500 ° K
Auto Aperture Settings: 5
Guide Number: 148 @35mm (ISO 100) <- in Feet
Bounce Capability: vertical 0° to 90°
Swivel Capability: horizontal 360°
Auto Apertures: 2.8, 4.0, 5.6, 8.0, 11
Auto Distance Range: 1.6-13'; 1.6-18'; 2.3-26'; 3.3-36; 5-52'
Lens Coverage: 35mm on full frame; 28mm w/Included Wide angle Diffuser
Recycle Time: .3-13sec Alkaline, .3-7sec NiCD, .3-2.5sec P50 Pack, .3-18sec A/C
Power Source: 6 1.5-Volt "AA" Alkaline, Lithium, NiMh or NiCad Batteries
#Flashes w/Fresh Batteries: Alkaline - 3600-140
Flash Duration: 1/300-1/20000
Color Temperature: 5500K
Dimensions (W x H x D): 4 x 9.7 x 3.6in/10.16 x 24.64 x 9.14cm
Weight: 2.4Ib/1.1kg (with batteries)
via
ebay